Automotive Tools For Your Home Garage

Automotive Tools For Your Home Garage


You can save hundreds of dollars on garage fees every year by carrying out minor servicing and maintenance jobs on your car yourself.
Armed with a selection of widely available automotive tools, a garage manual for your car, and enough time and patience to get a job done properly, pretty much anyone can carry out the routine tasks needed to keep your car on the road and running smoothly.

One of the most satisfying aspects of carrying out maintenance tasks on your vehicle – aside from saving money on expensive garage bills – is that you are able to get an understanding of how the car works, and the more you understand about the vehicle, the easier it is to put things right in the event of a breakdown.

Any home garage requires a good selection of automotive tools to carry out work on a car. Some vehicles from certain manufacturers have non standard machining and sizes used throughout their construction, and you will need to get automotive specialty tools designed for the purpose of working on that particular car from a motor store. No home workshop is complete without a trolley jack and axle stands to allow you to get under the car and do things like oil changes and exhaust checks.

For most small jobs, such as changing the oil or replacing filters, changing the spark plugs and brake pads on your vehicle, general tools such as a wrench and a screwdriver are all that is required, and these are widely available in most hardware stores. It is a good idea to keep your automotive tools separate from other tools you may have, because if you begin a job and then discover that the tool you want to use is missing, it can cause major headaches.

Twenty years ago, cars were much simpler to maintain and understand than they are today. Computerised engine management systems and adjustable fuel injectors are now commonplace, and special automotive diagnostic tools are required in order to make adjustments to the engine timing and fuel air mix, whereas in the past, these jobs could be done quite simply.

Areas of the car that almost anyone can handle the regular maintenance of are the interior and exterior panels. Simple scratches and dents to the bodywork are easy to repair using a soft mallet for panel beating and abrasive paper, spray paint and filler for paintwork repairs.

If your car is well used, the interior is likely to start to look tired and dated and in need of a little tender loving care. Thankfully, there are many automotive upholstery tools available to help you to tidy up the interior of the car and bring it back to its sparkling best. You can repair small tears and burns on the seats by darning them or applying a repair patch over the affected area. The trim of the car can be brought back to life with a good buffing using a polisher, while using specialist tools it is possible to repair the carpets or even replace them.

Of course there is much more to owning and maintaining a car than just tightening nuts and sewing up split seams, and you may find that you want to add non-stock parts such as a more efficient air filter or new exhaust to improve performance, and once you understand the basics of automotive maintenance, upgrades and tuning will become more accessible, saving you even more money in the long term.

Doing small jobs yourself can save you plenty of money on garage bills, and having the right automotive tools to get the jobs done is an excellent idea that will save you time and effort in the long run. However, one of the most important things for any mechanic to know is when to pass over a job to an expert, and rather than potentially do more damage than good, to get a qualified mechanic to carry out work on a car.

Automotive Painting

Automotive Painting

A car with an excellent paint job is one of life’s true joys. It’s like being the kid with the best bike in the neighbourhood or the biggest piece of birthday cake. Whether you drive a ’47 Eldorado, a ’66 Beetle or an ’07 fortwo, a great paint job will take your vehicle from ho-hum to headturner.

Actually creating a great automotive paint job takes skill and finesse. Automotive painting is one of the most arduous and painstaking tasks in crafting an automobile. It can also be one of the most costly. If you are on a budget, there are options for you. Some paint shops can deliver a good paint job for a fair price. Your other option is to take on the task yourself. If the paint job is a success, you’ll have even more to brag about: a hot set of wheels AND a “do it yourself” tale to tell.

Achieving a great paint job is a step-by-step process. You simply can’t rush automotive painting. Follow the basic steps of preparation, primer application, blocking, final paint coat and detail application. This can seem like a daunting task for any beginner, but the entire job can be completed in just a few days.

Prepare
Before you begin, check with local bylaws and regulations regarding the use of spray paint in homes and enclosed areas. The last thing you need is a legal holdup delaying your painting job.

Cleaning the car is your next crucial step. The car must be spotlessly clean and free of dirt. Use detergents to clean the car top to bottom, and then follow up with grease removers. After the car has been cleaned, it’s time to begin sanding. An air sander (preferably a dual-action sander) should be used to remove the old paint from the car. This kind of sander will not cause body damage because it removes paint without digging like other sanders and grinders. Every trace of paint must be removed to create a perfect palette for your new paint job. Automotive detailing tape or even duct tape can be used to cover and protect other parts of the car, including plastic moldings and windows. In addition to removing the old paint, all traces of rust have to be sanded off. Rust will spread if ignored or untreated, and the last thing you want is body rot happening beneath your spiffy new paint. You can repair minor body flaws on the car’s surface using fillers. Shape the compound with care using a sanding board, then follow up with a glazing compound. This step will help to ensure a smooth-as-glass finish on your ride.

Mask
After the whole car has been initially cleaned, then sanded, a final cleaning takes place and the vehicle is ready to be masked. In this step, every part of the car that shouldn’t be touched by paint is covered and protected. Remember, you will be using high-grade automotive paint that doesn’t wash off with water. Cover your windows, every light and reflector, all window rubbers, all chrome, tires, wheels, door handles, wipers.. take a good look and what needs to be masked. If you don’t want even the tiniest bit of over spray on it, cover it up! The tools and materials needed for masking are available at automotive supply warehouses and hardware stores.

Prime
Priming is an essential step to providing a good foundation for your new paint. A flawless prime coat will help you to achieve a perfect paint job. Valspar epoxy is a good primer choice, combining dependable filling capabilities with minimal shrinking. After the primer has been applied, a second coat in a contrasting colour should be applied on top of the first layer. This will serve as a sanding guide. The primer should be sanded to a smooth finish, but don’t sand too vigorously or you could actually damage the body of the car. When the priming is complete, a sealer is applied and a final sanding takes place.

Finishing off
In finishing off the automotive painting, it is essential to achieve uniform colour. The spray gun should be held ten to twelve inches away from the body to avoid streaks and runs. This is necessary when applying the basecoat, final coat and clear coat.

Regardless of the type of car you drive, a new paint job can turn it into a real showstopper. Automotive painting can be a time consuming task, but you can do it if you take it step by step. The creative energy will be good for your soul, and the compliments you receive will be great for your confidence.